|07-07-2011 07:12 PM|
i'm just going with the v8 mounts.. they;re 7.99 and the holes are different.
see, the front 3 holes are what bolts the V8 in.
If youre not on thirdgen.org, thats a good place to be for tech info.
They've got a good swap read.
lots of good stuff there. helping me alot.
|07-03-2011 07:15 PM|
v8 mini truxks
When I did my 5.0 into my 83 ranger I ordered the Info from a company that also did the s 10 kits. I looked at the pictures and made my own mounting brackets, also they had the Ford info I needed,,, maverick V 8 motor mounts, and stock exhaust manifolds. econoline V 8 w PS had a fuel pump that fit, 460 van oil filter casting There was a lot of S 10 info in those pages but all I looked at was the ford info. S 10's are a lot easier than rangers. It would have been easier to have done a 350-350 into the ranger.
|07-03-2011 07:06 PM|
|RippinRon||It's definitely a lot easier with the control arms out to get at them but it can be done with swivels and extensions. I think the 2.8 mounts would make the engine sit higher than stock. If you do go that route post some pics. I'm about to drop my engine in but if I could gain some adjustability that would be good.|
|07-03-2011 11:57 AM|
sho nuff! happy belated to ya brother.
I was at the beach.
|07-03-2011 09:46 AM|
|Bryan59EC||AND----a year older|
|07-03-2011 09:44 AM|
well, the camaro has the bracket holes there, for the v8, and i already had one bolt out, so im thinking im going to cut the bolts, and use shrink wrap tubing. or fishing line to fish (no pun intended) the bolts back up in the hole and bolt from the top.
Just have to move the brake line.
Sorry for the late reply. Been at the fire academy, so ive been short on computer time.
Now im graduated and edumacated.
|06-05-2011 03:25 PM|
easy, there even adjustable to move the motor forward or backward to clear the HEI to firewall. Bolts right up
|06-05-2011 02:54 PM|
|06-05-2011 08:53 AM|
s10 v8 swap mounts?
does anybody here have the v8 swap mounts for s10/camaro?
I need some for my thirdgen, so i dont have to fight the K-member, to put in those piss agrivating mounts, and i dont want to weld them in..
They bolt to the easier to get to, v6 mount holes. If anyone has them, is there anyway someone could get me some dimensions, so i could make my own?