Hot Rod Forum banner

Roller cam choices

783 views 4 replies 4 participants last post by  joelster 
#1 ·
I have a 350 4 bolt main engine with double hump heads,eldebrock intake,2500 stahl and hedman headers. I am looking to convert over to a roller cam set up and need help chooseing the right size cam. I know comp cams can advise me on the right cam but I would feel better getting this information from someone who already has this set up. The engine is currently in a Chevy S10. Thanks
 
#5 ·
Those heads don't flow near enough to fully take advantage of what a good roller cam can offer you. All of those companies are going to ask you a bunch of questions first. What type of driving, what is the compression, what springs, what size carb, etc, etc....

I'd rock something along a 220ish duration with .480"ish lift.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top