|08-31-2011 09:52 AM|
|DanielC||I used WD-40, and just keep grinding. This was on some VW heads, for a sand rail.|
|08-31-2011 03:59 AM|
|TommyK||Transmission fluid works also and is less expensive.|
|08-30-2011 03:24 PM|
Anti-Sieze on cutting burrs
A few months back the question came up about clogging burrs when used on aluminum. Someone suggested using anti-sieze compound, well I just had some aluminum come in and had to do quite a bit of grinding on and recalled the suggestion, tried it and was very surprised how well this works.
What useually takes an hour was cut down to fifteen minutes.
Thanks to whoever it was.