|10-01-2011 12:58 PM|
i retrofitted 06 dodge durango front window regulators into my 58 chevy pickup. they were free
i used the front regulators because they were scissors type. the backs are single arm.
|09-30-2011 11:37 PM|
|email@example.com||Use your old Plymouth window riser mechanisms. Cut off the crank handle and gear and weld on a bracket to adapt 80's Ford power motors. Dirt cheap @ Pick-A-Part and better than any after market Chinese risers out there. See here and here.|
|09-30-2011 10:33 PM|
|27Tall T||I've used the EZ window units in my '32 and they work well for me. The only draw back is that they use metric bolts.|
|09-30-2011 03:58 PM|
Guys thanks for the info. Ouch though. I did not expect $700 for a 4 window application. I did a little searching on the net and found kits for around $300. Has anyone tried these out? There is a 2 door kit from EZ wiring that is about $150 and they said I can buy two kits in order to control 4 windows.
|09-30-2011 03:19 PM|
|DanTwoLakes||Here is the link to their web site: CLICK HERE|
|09-30-2011 02:02 PM|
try Specially Power windows in mid Georgia.
|09-30-2011 01:15 PM|
Welcome to the site. Look up kits on the Internet, it will give you a range and you can pick from there.
|09-30-2011 12:59 PM|
power window kit
Does anyone know where I can get a good power window kit for my 49 Plymouth?