|10-11-2011 08:35 PM|
Explorer 8.8"'s are good and cheap, may need to move the perches though...
|10-11-2011 06:43 PM|
|prostreet6t9||My buddy just did a 55 ford truck swap. He used a 9" out of a 78 F150. I believe the 78 diff was 4"ish wider but it worked out good with his wheel and tire combo.|
|10-11-2011 03:03 PM|
It's not stated, but this one is also the width from the wheel mounting surfaces- http://www.carnut.com/specs/rear.html
|10-11-2011 02:50 PM|
You might have t cut the mounting pads off and move them, just don't cut though the housing. If you want different springs you will have to measure what you have then find some the right length, or you can buy a mounting kit.
|10-11-2011 12:25 PM|
|oldman w/white 57||
Needing to update rearend of my 54 Ford PU. What's my best donor for this swap. Keeping it Ford and springs. Drum/Disc brakes not that important to me