|11-11-2011 07:47 PM|
|gmc1990rodder||Thanks alot cole! Maybe I can get the money for a rebuild soon!|
|11-11-2011 05:20 PM|
Cobalt's right about getting the 400 pluse torque, and IIRC that engine should be in the 305 -325 ft/lbs from the factory anyway.
|11-11-2011 04:42 PM|
|gmc1990rodder||Thanks allot cobalt! This atleast gives me some sort of direction!!|
|11-11-2011 04:24 PM|
Maybe someone knows the factory torque rating for it- I have Chevrolet manuals but they're either newer or older than '72. The factory ratings started taking a hit in '71 w/the lower CR, etc. required by the fedgov, and how the power ratings were figured changed from gross to net- which made the '72-up engines look 'weaker'.
Bottom line is it really doesn't matter what it HAD, it can make 400-plus ft/lbs w/relative ease.
|11-11-2011 01:09 PM|
|gmc1990rodder||Thanks alot project69,do you know how much torque?|
|11-11-2011 07:50 AM|
|projectman69||Uh looks to be around 72 with 170hp it'll have plenty of torque, but if you're planning on doing anything with this engine these will really mean nothing.|
|11-11-2011 07:21 AM|
|gmc1990rodder||LOL thanks I got that from pulling the oil pan! I have found info on the casting numbers just not on the suffix numbers. The info i found on the suffix came back it was an alum. headed 396! NOT! lol thanks for the reply though|
|11-11-2011 07:11 AM|
|projectman69||Has a 4 bolt main|
|11-10-2011 08:34 PM|
Need help with suffix codes
This may be a stupid question, but i can't find out any info on my engines suffix codes. I've tried to just google and yahoo the numbers with no luck. And tried to find a site to help find more about my engine with no luck either.. It is a 400ci sbc , casting number is 3951511, and I found out the basics with this but wan to know more, the suffix numbers/codes on the front of the block are T0414CKP and another set is,12S251618.. thanks for any help in advance!!