|11-17-2011 03:41 PM|
The 93-LT1 T/A, Z-28 came with the 700R4 Trans. Not sure but, you may be able to use the 93 ECM and swap in a 700R4.
What about a programmer for the 4L60E Trans? These allow you to set Shift speed, boost Line Pressure etc..
I should have asked if you're going to use a Carb or keep the EFI etc..
|11-17-2011 03:34 PM|
It looks like the (-3) Kit is for Manual only, no electronic control.
The (HD2) Kit may work better for your setup, it gives full manual control but, works with OEM electronics, ECM.
HD@ >> http://transgoonline.com/products.ph...dcountview=Yes
Other >> http://transgoonline.com/products.ph...7&parent_id=97
|11-17-2011 03:21 PM|
|malcolmz28||Will this allow me to shift manualy 1st to 4th in my auto trans I tried to call them but no answer it looks like a good kit I'm trying to set the car up as a drag car|
|11-17-2011 01:35 PM|
TransGo has a "4L60E-3" Reprogramming Kit that provides full Manual control.
Rossler has a Plug & Play controller "Little Black Box" for Full Man control.
The Ross-Lock may not be compatible with your Engine's ECM tho'.
|11-17-2011 03:19 AM|
4l60e to a 700r
I have a 94 lt1 camaro with a 4l60e tranny I want a manuel vaulve body put in it but no one makes them but they make them for the 700r tranny can I put the 700r in the car if so what changes do I have to make