Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Interior> Sailrite Walking Foot?
User Name
Password
lost password?   |   register now

Thread: Sailrite Walking Foot? Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
11-29-2011 03:50 PM
DanTwoLakes
Quote:
Originally Posted by Brimstone
It actually depends on which Sailrite machine you are looking at. Dan is talking about their Ultrafeed line (the LS-1 and LSZ-1), but they do have other types of industrial machines listed on their website - don't know if they also make these heavier-duty machines or just re-sell them, though.

But yea, his advise is spot-on.
Yes, I was talking about their portable machine. They sell a machine exactly like a Singer 111W, but it is more expensive than the Singer.
01-21-2010 12:54 PM
Coodeville "and 10" space to the right of the needle"

How much space do you have on a Singer 111W?
01-21-2010 10:40 AM
Brimstone It actually depends on which Sailrite machine you are looking at. Dan is talking about their Ultrafeed line (the LS-1 and LSZ-1), but they do have other types of industrial machines listed on their website - don't know if they also make these heavier-duty machines or just re-sell them, though.

But yea, his advise is spot-on.
01-21-2010 10:34 AM
Coodeville
Quote:
Originally Posted by DanTwoLakes
The disadvantage of this machine is that it only has 7 1/2" of room to the right of the needle, it only has 5/16" of foot lift, it only has a 1/10th hp motor which is geared down to get enough torque to handle heavier sewing,(this would not be a disadvantage to a beginning sewer because it goes 1/5th as fast as an industrial machine) it only has drop feed instead of compound feed (compound feed is a combination of drop feed and needle feed), and it is a portable machine, all of which can create problems with the larger pieces involved in auto upholstery. It also costs around $700.

For a couple hundred dollars more, you could buy a brand new industrial compound feed walking foot machine that has a table, 1/2" of foot lift, a 1/2 hp motor, and 10" space to the right of the needle. For considerably less than that, you could buy a used industrial machine.

The Sailrite machine is a very well built machine, and would be fine for furniture upholstery, sail making, and lots of other types of sewing, but would be very limited when sewing two pieces of fabric together that are glued to 1/2" sew foam.
You told me everything that I wanted to know. Thanks
01-21-2010 07:36 AM
DanTwoLakes The disadvantage of this machine is that it only has 7 1/2" of room to the right of the needle, it only has 5/16" of foot lift, it only has a 1/10th hp motor which is geared down to get enough torque to handle heavier sewing,(this would not be a disadvantage to a beginning sewer because it goes 1/5th as fast as an industrial machine) it only has drop feed instead of compound feed (compound feed is a combination of drop feed and needle feed), and it is a portable machine, all of which can create problems with the larger pieces involved in auto upholstery. It also costs around $700.

For a couple hundred dollars more, you could buy a brand new industrial compound feed walking foot machine that has a table, 1/2" of foot lift, a 1/2 hp motor, and 10" space to the right of the needle. For considerably less than that, you could buy a used industrial machine.

The Sailrite machine is a very well built machine, and would be fine for furniture upholstery, sail making, and lots of other types of sewing, but would be very limited when sewing two pieces of fabric together that are glued to 1/2" sew foam.
01-21-2010 05:47 AM
BBCMudbogger My wife used to work in a sail shop. That is a bad *** sewing machine. The building had a raised wood floor and the operator sat down in a pit so they could manuver the huge sails as they sewed them. Kinda neat to see how sails are made. But the guy she worked for is a jerk....LOL
01-20-2010 06:38 PM
Coodeville
Sailrite Walking Foot?

I was just checking one out. What is the shortcoming of this machine?

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 07:10 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.