Hot Rod Forum banner
Status
Not open for further replies.

Hunter System 700 tire balancer

156K views 316 replies 139 participants last post by  dany.daniel.bouchard 
#1 ·
I just bought a used Hunter System 700 electronic balancer. This one even came with the user's manual and parts list. It appears to date from the 1980s (the manual cover has a picture of a Ford Fairmont). Unfortunately, the manual has nothing on calibration. Is anyone familiar with the calibration requirements or process for this unit? Thanks.
 
#79 ·
Hunter 700 Lower Plane Err

Thank you for manual.

I started the tire balancer,appears 888 for test, after that I get an error when I depress ENTER button twice. I don't know what this error means, but it's not working properly. Only starts when i depress START button and it stops only with STOP button. I did't worked with Hunter 700 because it was broken already and I have to fix it somehow.Any help ?

Thank you.
 

Attachments

#92 ·
Hunter computer balancer 700 series

I need some help I connected the balancer I got power to the system when I hit the on switch in the back it doesn't display the 888 it goest straight to 0.0 is that normal is my 1st question? Second when I press the on switch in front to do my test the wheel budges like it wants to turn but doesn't move and when I hold the stop bottom it rotates clockwise till I let go. When I check the components in the back right hand side seem to be functioning when I push start it locks in place and when I push stop it releases can any one help me with some tips
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top