|12-16-2011 09:40 PM|
|1937MoPar||can you please post pix?|
|09-09-2003 09:41 PM|
I made mine from 1/2" diameter aluminum rod I bought at Home Depot. I drilled & tapped both ends. Bent the rods in a vise using aluminum sheet stock for protection from the vise jaws and then polished them. They really shine nice. I used some welding rod to mock up the length so I got it right on the 1st try. I'm using stainless button head cap screws on the radiator end with a couple of washers for attachment.
|09-09-2003 08:41 PM|
Depending on what you are putting it on a '28-'36 Ford radiator rod could be classified as custom. What application are you looking to do?
|09-09-2003 05:57 PM|
|rocknrod||thanks, but I'm looking for "custom length" rods|
|09-09-2003 12:39 PM|
|Dragon J||Don't exactly know what you're looking for, but Speedway Motors has radiator support rods for '28-'36 Fords in stainless at www.speedwaymotors.com|
|09-09-2003 12:19 PM|
Radiator support rods
Anyone know of any companies who make custom lenght radiator support rods out there ?