|12-14-2011 05:12 PM|
|12-14-2011 03:45 PM|
|poncho62||I deliver for NAPA.....2 of us lifted a 331 HEMI block in and out of the van today. Piece of cake. I told him that he should just use it as a boat anchor, but thats the Chevy guy in me......He did laugh, but looked at me funny.......|
|12-14-2011 05:54 AM|
|BOBCRMAN@aol.com||I had one customer bring a block crank and heads in his old Cavalier.. Removed the passenger seat and loaded the block in its place..|
|12-13-2011 11:26 PM|
|junior stocker||I have several Black and Decker drill, side support handles, that I use to screw into the bell housing and water pump bolt holes; works good to lift and move blocks around using two people. You can even "bag" the block in a garbage sack, then screw the handles in; keeps things cleaner.|
|12-13-2011 10:11 PM|
I put mine in the trunk, just make sure you have 2 people to load and unload so no one screws their back up.
If you have access to a mini van, or station wagon, they are easier to load.
If the block is greasy, but some cardboard down first to keep the carpet clean.
|12-13-2011 08:09 PM|
Need to get block to machine shop
I need to get my sbc block over to be hot tanked and I am looking for suggestions. I hear the bare block weights about 160.