Hot Rod Forum banner

front skinny fenders

7K views 7 replies 8 participants last post by  Centerline 
#1 ·
where can i find a set of front fenders like the ones on milners coupe in american graffitti? thanks
 
#2 ·
What I do for narrow fenders is to get a pair of trailer fenders and take a strip out of the middle and weld them back together to get the width I need..makes wider fenders as well by inserting a piece..those are usually 18 gauge and not herd to work with..

Sam
 
#4 ·
custom van

A lot of options, In the 50's we used the chrome spare tire covers from continental Kits ( for the youngsters, thats when you extended the back bumper brackets back and mounted the spare tire between the trunk and bumper. ) a lot of the 70's custom vans had outside mounted spare tires and metal covers.
 
#8 ·
There's a company that is reproducing these in fiberglass. HERE is the link. They're about $50 I think.




Centerline
HotRodsAndHemis.com

"Speed has never killed anyone, suddenly becoming stationary… that’s what gets you." – Jeremy Clarkson
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top