|12-28-2011 08:34 AM|
we had to make the cables, for the motors on the delivery hose reels, for heating fuel trucks
(very high amp)
and thats the style tool we used, worked great
|12-28-2011 08:28 AM|
New cable lug crimper
Since I'm redoing my battery location therefore the heavy 1/0 wiring, I've decided instead of soldering those big lugs like they are done now, to spend a few bucks and get one of these gadgets. They look like they will do the job, depending on where you buy them can be pricy - though I didn't pay anywhere near the usual advertised price.
Anyone have any experience with them?
QuickCable: Brute Hammer Crimper -
The Brute Hammer Crimper is a Hammer type crimp tool, designed to take the abuse of quick strikes against it's "head" to crimp terminals solid and securely.
* An inexpensive, simple yet strong crimping tool.
* Can be used with: Hammer, Vice or Press.
* Can crimp: 8 Gauge to 4/0 Connectors.
* Spring-Loaded pin locks the "hammer" in the "up" position for easy loading of connector and cable. When released the "hammer" will hold the connector securly during the crimp process.
-- SPECIFICATIONS --
Length: 4 Inches.
Material: Cast Iron.
Style: Hammer Crimper
Base Color: Blue
QuickCable Part#: 4266