|12-29-2011 05:38 PM|
|5window||Thanks for the suggestions. I also received one about using a gas door and hinge to create a panel. I kind of like that idea, being a hotrod and all and I'll see what's available at the scrap yard then pursue the hinge idea.|
|12-29-2011 11:35 AM|
You need something like a lid stay hinge. CLICK HERE
You will probably have to modify it a little, but it should work.
|12-29-2011 09:38 AM|
|matts37chev||i did a google search for Detent Hinge and came up with quite a few ideas|
|12-29-2011 09:27 AM|
The panel I am looking at right now is a non-folding Bob Drake item for a 53 Ford. It, and the plastic panel that came with the heater, are approximately 3.5x 2.5" Picture two 3/4" knobs and a panel just big enough to hold them.
There should be plenty of space behind the dash-several inches at least and it will ultimately hang down at the center of the panel so a couple feet to the floor.
|12-29-2011 09:19 AM|
and how much room will you have for the mechanism?
will there be any size restraints on the area behind the dash?
|12-29-2011 09:02 AM|
Fold down instrument panel? Help,please.
I am making a wood dash for my Model A, roughly the shape of the '32 dash. I need to add a small panel to hold the heater fan and selector switches. I am hoping to come up with an idea that would let the panel rest at 90 degrees -essentially folded up behind the dash most of the time- but swing down and stay in place when I needed heater controls.
I can't quite fathom,or find, a mechanism to let me do this. I'd appreciate any input or sources. Thanks.