|Today 12:21 AM|
matt any chance of a better photo of your throttle pedal assembly.where did u purchase the rev counter .how cheap is cheap
|Yesterday 07:33 PM|
Spent most of the day working on my sons nissan, but.....
I did get my new cheapie tach mounted.
Now I just need to run a few wires, and I will have RPMs
|Yesterday 08:51 AM|
thanks matt.the pieces i tapped i made from 3mm mild steel.the others were made from 2mm aluminum .i would have liked 3mm but the guy i get the offcuts was closed sat after dinner and i couldnt wait till mon morning till he opened again.the panel is 3 layers of 2mm stacked on top of one another.i cut the holes on the bottom panel so i wouldnt have to use as much adhesive.i might put a small rivet in it yet.
this morning i started working on the steering wheel resto.cut up a bracket to hold the wheel while im working on it.got it welded up.
the steering column is in primer now.tidied it up a little and put a rubber gromet in the hole where the horn wire comes out and thinking of a grease nipple where the bearing is in the bottom of the column.
my upholsterer is gone on a weeks holidays and will commence the seat next week.got some black vinyl last week and some foam.
gauges arrived back from the states yesterday after a rebuild.off to collect them .the panel with the cutouts was the solid panel till i cut it.over n out
|Yesterday 06:54 AM|
You do some very nice work, and that always takes longer than you think it should.
Are you using the solid panel, not the one with the cut outs, now that you made the strips?
|Yesterday 03:16 AM|
made up these two strips which i bonded with seam sealer to the underside of the grill drilled and tapped them so there is no fiddleing about with nuts and bolts now;
|05-24-2015 10:24 PM|
|05-24-2015 02:29 PM|
did some work to the rad panel.in primer so far .what is the normal gap between the grill and the hinge mine is about 5/16 with no shims at the moment
|05-24-2015 06:18 AM|
The taller front tires probably won't get here and mounted, until the end of next week.
|05-24-2015 05:26 AM|
|Leakie||Hey can you take a side view pic of the whole car with the new wheels on it? I would like to see a before and after comparison.|
|05-23-2015 04:26 PM|
|matts37chev||I did end up ordering a size taller (235/50r17) for the fronts.|
|05-23-2015 04:00 PM|
|Trophyman||WOW, Those wheels and tires look great Matt|
|05-23-2015 08:57 AM|
|Leakie||Looking good Matt!|
|05-23-2015 08:12 AM|
Looks awesome Matt!
|05-22-2015 09:42 PM|
|05-22-2015 09:39 PM|
|Too Many Projects|
|This thread has more than 15 replies. Click here to review the whole thread.|