|02-24-2012 03:33 PM|
|02-24-2012 12:25 AM|
I am a little confused...Are you wanting to be completely original? IMO, the 5mph bumpers with the shocks were butt ugly, tucking it into the car would help a lot, once again, just my opinion. How many holes were for the rubber strip and would it be possible to fill those holes with some chrome bolts? I see by a little searching some are converting to the 72 bumpers. Also, on a Nova site, dated yesterday, some guy has some for you for 50 bucks.
|02-23-2012 07:35 PM|
Geez.. I have a decent daily driver FRONT BUMPER complete assy that you can have ....PM me if you want it..I have no idea of shipping to Canada from Massachusetts...sorry no rear one
|02-22-2012 05:44 PM|
|1ownerT||Once you pull it back out, do you have the filler piece to close off the gap?|
|02-22-2012 02:40 PM|
74 Nova rear Bumper
I am restoring the rear bumper on my 74 hatchback to it's original position.
When purchased the bumper was tucked in by removal of the shocks.
I don't have those shocks, but I am hoping that someone can tell me how many inches out did the shocks push the bumper back, that way I can make steel blocks to bring it out.
I am in the middle of a $8000 facelift and really need this info.
The front has a newly chromed bumper purchased from BUMPER BOYS in California, with shipping and duties to Canada $1000
The chrome on the rear bumper is very nice, but that bumper has the holes for the rubber molding, I can't afford to buy a used one without those holes and get it chromed at this time.
Can I use another type of molding, those of you who faced the same situation, what did you do.
I can't find the moulding anywhere, and the damaged one that i have would probably be expensive to repair.
thanks for your time