|04-14-2012 07:19 AM|
Yeah, the TH400 aren't bad.
I'm used to the 200-4Rs' that have the Steel Bullet & Aluminum case, they're a real pain sometimes dissimilar metals.
|04-13-2012 01:56 AM|
|mmerlinn||I have had thousands of 400s over the years and never had a problem yanking the speedo out, even when the case was so corroded that there were corrosion holes in the case.|
|04-12-2012 12:06 PM|
|MJS69||Thanks fellas I'll soak it with some penetrating oil and yank it out tomorrow....|
|04-12-2012 05:55 AM|
If it's corroded it can be a pain. May need Vise Grips, Channel Locks pliers etc..
Soak it with some PB Blaster or my favorite below. LOL!
|04-12-2012 04:39 AM|
|mmerlinn||Just grab the speedo cable and pull.|
|04-11-2012 11:05 PM|
removing speedo gear housing from TH400
I figured as long as I'm doing all this work under the car I may as well fix my inaccurate speedo problem. I've never removed the speedometer gear housing from a TH400, I got the retaining plate off, now how do I remove the housing itself without messing it up?