|05-01-2012 10:17 PM|
That is your speedy sleeve that will fit your yoke.
|05-01-2012 07:44 PM|
I never knew about them but thats a great idea
|05-01-2012 07:39 PM|
|BOBCRMAN@aol.com||The yoke is probably worn too far. You can get a new seal and place a .060" or so shim in the bore to hold the seal out in a different spot. Get a "speedy sleeve" repair sleeve and press onto the yoke. Or get another yoke.|
|05-01-2012 07:24 PM|
Ford 9 Inch Yoke
I recently had a 9 inch leak on me from the pinion. I change out the seal and it still weeps. The yoke had obvious indentations on it from where the seal sat. Should i replace the yoke. Could i have replaced the seal wrong?