|05-03-2012 11:19 PM|
|05-03-2012 10:02 PM|
Always use a good wax and grease remover prior to painting, never just dish soap as this will leave a film, Ppg dx 330 works great, depending on your area you may need a waterborne cleaner as Ppg dx 394 be sure to wipe with a clean wet cloth after using 394 also as it may leave a film.
|05-01-2012 10:59 AM|
Definetly wash everything with a dish soap first.
Then start your sanding
|05-01-2012 09:36 AM|
Hey Hotrodders need some help. My son and I are attempting to paint our project 1985 chevy short bed. One question I have is before we start to prime the truck should we use wax and grease remover then wipe down with tac rag or skip w and g remover and use surface wash and then wipe off with tac rag? I also read to wash the whole truck with dawn soap and rinse off before painting. Any info would be great. Thanx