|05-07-2012 06:50 AM|
In the 70's I restored a horseless carriage Steel 23 T touring. I bought a set of plans done by Mel Miller in Oregon, His daughter is now selling them. The front half of the touring is the same If you also want a LH front opening door like australian and some canadian T's you could just flip the plans. They used tongue and groove or mortice and tennon joints. lots of band saw work. If you google Model T ford Wood plans you will link up to the Model T ford club of america (MFTCA) Web site and discussions there. In the last Glass T bucket I used an original steel T seat riser to tie the sides of the body together.
|05-07-2012 06:44 AM|
here are some pic's
Hopefully the link works...
|05-06-2012 08:12 PM|
Here is a great thread over on a T bucket forum laying it all out. Click here
|05-06-2012 04:32 PM|
on the inside of the T,take an oak 2x4 (or other HARD wood),shape it to the contour of the inside of T,(BELT SANDER) using,epoxt\y,glass it to back side of body,take a sabre saw,and cut door and wood out together,use the wood to put the hinges on.
|05-06-2012 03:29 PM|
|adantessr||Speedway motors sells a complete R/H door kit. I have yet to find a driver's side door kit.|
|05-06-2012 03:21 PM|
Frame work for installing a doors into a fibreglass T-Bucket body
Since having a stroke I now find it hard to get into my T-Bucket with out the aid of doors and now I'm having trouble finding any plans for the sort of frame work I will need to install on the inside of the body to support the body sides as well as the right and left hand door hinges and locks into my fibreglass doorless T-bucket body. Any help from members would be great.
Please forgive any spelling mistakes since the stroke things just don't come out right on occasions.