|05-12-2012 06:04 PM|
|theitalian||Transmission is in and works great|
|05-08-2012 07:32 PM|
|theitalian||Took it apart again inspected everything again now it applys with out pluging the reverse port but still leaks past the reverse port.|
|05-08-2012 06:51 PM|
|theitalian||Seal rings are new and not leaking i took the drum apart again all the piston seals are good i cant find any cracks anywhere the air comes out the reverse port if i plug the hole with my finger it will work....|
|05-08-2012 12:04 AM|
The photo below is from Jakeshoe's thread on the TH350. It shows the forward and direct drums on the pump (there's a hole in the bench for the pump to fit through) w/all the sealing rings and thrust washers, etc. assembled as it would be in a completed tranny.
You sure you don't have any damaged, missing or broken rings/seals or cracked piston, etc.?
|05-07-2012 09:38 PM|
Hello I'm rebuilding a th350 when I Air check my direct crutch pack I have to plug another hole in the pump housing for it to work is this normal?