|05-25-2012 05:27 PM|
|1ownerT||Or when turning it will not return to center on it's own, you will have to manually turn it back...not safe.|
|05-24-2012 10:36 PM|
double check before driving
If the wear is bad enough in the straight ahead position you could tighten it too much and not be able to turn, or be very hard to turn .
|05-24-2012 08:48 PM|
|Cape Cod Bob||Why does the movie "Christine" come to mind.|
|05-24-2012 11:16 AM|
Sounds like you have play in the steering box,or,its worn out. on the top of the box,you will find a nut,holding a stud with a screwdriver slot,(usually) loosen nut,using a screw driver turn stud in (clockwise) about 1/4 turn,tighten nut,check for steering wheel play,still loose? do the adjustment again,only 1/4 turn at a time though.keep going,unless the box is worn out,this SHOULD fix the problem...BUT,it could also be worn out suspension components..(bad ball joints,or tie rods.) have a friend move steering wheel (rock it)while you look at the front end parts.do this,BEFORE adjusting steering box..
|05-24-2012 10:41 AM|
Sounds like the steering box is worn and needs adjustment, or replacement if the wear is bad enough. Glad to see you young guns taking on an old project. It's gonna be a nice ride when your done.
|05-24-2012 10:14 AM|
Why does it wobble
I am a 15 year-old and i am restoring a '59 chevy truck. I was wondering why my steering wheel shakes back and forth even when the truck is still?