|06-03-2012 01:13 PM|
|sstock||Yes Sir, with the yoke in, it is fine.|
|06-03-2012 01:06 PM|
Without the drive shaft yoke in, right?
Perfectly normal....When you slide the yoke in, it wont move
|06-03-2012 09:08 AM|
Tailshaft side play for a TH 350
I'm trying to decide if I need to replace the tailshaft bushing in this tranny. The rear seal is still good but is relatively new but the shaft will move 1/8" either way about 250/1000s total. Any opinions from the trans guys??
Thanks in advance,