|06-21-2012 09:30 PM|
|krypty||Id go with a stealth intake and the q-jet... those carbs are without a doubt great for stock applications....Modified they are even great on street/strip performance too...|
|06-21-2012 06:38 AM|
|ap72||Edelbrock 1406 carb on a edelbrock performer intake. Its cheap, very effective, and idiotproof. A holley or quadrajet will work too, but they're more complex.|
|06-21-2012 01:33 AM|
|327NUT||A double pumper on a "stock" 283??? I don't think that is a wise recommendation.|
|06-21-2012 12:04 AM|
I used a 625 carter on a street master intake and was very happy with it.For performance a holley 600 double pumper long bowl works for power but fuel economy suffers a lot.
|06-15-2012 08:15 PM|
|1930u||The old Holley 6210 with stock Q-jet manifold is a great combo especially with a 4-speed and 3:55 through 4:11 gear.|
|06-14-2012 08:15 PM|
|lg1969||Hi, You can try a Holley 390VS #8007 and use a square bore type alum high rise dual plain manifold. It should run very nice. hope this helps.|
|06-14-2012 02:48 PM|
Weiand action plus, Edelbrock Performer for intake.
Rochester Quadrajet for a carb.
Or you could just get a factory cast iron Quadrajet intake which will work just as well on a stock engine if you wanted to go the cheapest route.
There are also factory aluminum Quadrajet intakes out there as well.
|06-14-2012 01:23 PM|
carb. for 283
what is the best combo intake and carb for stock 283?