Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Hotrodding Basics> Cam timing
User Name
Password
lost password?   |   register now

Thread: Cam timing Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
06-19-2012 01:53 PM
kingofny1997 Thanks got it, really understand got it, I am going to put the timing cover and gaskets then to the water pump and pulleys
06-19-2012 01:11 PM
JohnTN Yes.

As you rotate the engine the next cylinder to fire will be on its compression stroke. So, as you approach the 6-12 position the #1 piston is coming up in the cylinder, both intake and exhaust valves are closed, and the fuel/air mixture is being compressed so you will feel air being forced out of the spark plug hole.

The firing order is 1-8-4-3-6-5-7-2 (on the GM engines I am familiar with)

On one revolution of the cam sprocket, each of these pistons reach TDC, in turn, every 45 degrees of rotation. So at 45 degrees you would feel air being pushed out of the #8 spark plug hole, etc. -- at 180 degrees, the #6 sparkplug hole.

And of course that is why it is important to have the spark plug wires going to the correct spark plug in the right order.

John
06-19-2012 09:20 AM
kingofny1997 Ok understood, now when I found TDC at 6-12 the #1 cylinder had the compressed air coming out the spark plug whole, when I turn it 180 degrees, and have it at 12-12 will I feel the same compressed air come out the #6 cylinder (since it happen with #1 at 6-12)
06-19-2012 07:47 AM
JohnTN You got it right. At 6-12 the rotor should be pointing at #6, at 12-12 the rotor should be pointing at #1. You can put it back together either way.

If you put it back with cam/crank in 6-12 position and rotor at #6, when you rotate 180 degrees it will be at 12-12 and rotor at #1. And vice-a-versa.

If it is a new cam, you ought to degree it to confirm the valve timing.

John
06-18-2012 09:37 PM
kingofny1997
Cam timing

What's up hot Rodders, a little on the confused side, since I hear this and then that....

I just installed a new cam and now the new gear sprocket with chain, now I have it 6 o'clock cam and 12 crank (dot to dot)... Lifters just installed, now next step I have read in certain places that 6-12 is TDC (but really #6 cylinder firing) 180 degrees out and that 12-12 is really TDC (#1 firing) ...how do I leave it 6-12 oclock or 12-12 o'clock before I put the timing cover on and distributor rotor would be on what number

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 01:11 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.