|07-21-2012 10:49 PM|
This is how you do it. If you got the bucks, it is expensive but is the right way to do the job and keep everything in alignment. You might want to read up on the I beam suspension and the engineering involved. Not a bad idea, but will explain why this is the right way to go.
|07-20-2012 05:27 PM|
|07-20-2012 04:46 PM|
|BOBCRMAN@aol.com||No dropped spindles are made for beam axle.. Many fabricated axles are sold for these.|
|07-20-2012 03:49 PM|
I have never did one on that new of truck and would check first, but on the older Fords thats what we would use.
You can have your axles rebent, but that will make them weaker and more prone to break.
|07-20-2012 02:06 AM|
f100 drop spindles
i am trying to find drop spindles for a 1970 ford f100 and cant find any, is there a reason, i dont know anything about i beam suspensions?