|08-01-2012 10:07 PM|
|08-01-2012 08:29 PM|
|ap72||try a different oil and or viscosity|
|08-01-2012 07:58 PM|
|loudandproud||thanks, ill try not to worry about it...|
|08-01-2012 07:25 PM|
|forgebench||As long as you tightened them down right I wouldn't worry about it. If it was super loud then you might need to readjust the preload but otherwise you'll be good. I've ran hydraulics a few times with aftermarket roller rockers, including a set of LS7 lifters, and they made that noise. I think you're good man.|
|08-01-2012 07:21 PM|
its not that loud that i can hear it outside... every once in a while if i bring it up to around 2500 rpm I can here it in the cab.
No misses, or carrying on... motor runs like a raped ape and moves my 4000lb pickup pretty good, pretty damn good.
|08-01-2012 07:04 PM|
|forgebench||That sound is pretty normal with aftermarket roller rockers. I've heard it on every engine I've had with them. My solid roller sounds like that with the hood closed.|
|08-01-2012 06:58 PM|
Sewing Machine... 350 SBC XR282HR Comp Cam with Lunati Roller Rockers
Motor has about 300 miles on it and i never really noticed but my engine sounds like a sewing machine. At first i feared it was a ring land, but a compression check showed that all was well.
Cam is a XR282HR, with LS7 lifters and Lunati Voodoo Rockers...
Im running procomp sheet metal valve covers and have plenty of clearance.
Preload is set up 1/2 turn past zero lash.
Is a sewing machine sound normal with an aggressive cam like this?
Its not terribly loud... i can hear it with the hood closed... but I can hear it with the hood open if i listen.