|08-03-2012 11:45 PM|
|FmrStrtracer||Summit, Jegs, Edelbrock, all sell throttle cable brackets the will hold both your throttle and TV cable, plus adjustable arms are available to attach a TV stud to the right position on your throttle arm. Its a little bit of fabrication, but shouldnt be hard at all. Just get the angle of the cable correct so its pull properly.|
|08-03-2012 10:24 PM|
i figure its like ford and chevy. some people love predators and some hate them.todays predators you can get one with an idle circuit.and i find lots of people mess with the adjustments to much as if they were regular carbs,instead of learning how properly.thanks for the input.
|08-03-2012 09:13 PM|
|vinniekq2||yay,spin agreed with me this time,lol.I knew we could find common ground.BTW spin,I actually like your truck.I had one the same colours and similar year.|
|08-03-2012 08:32 PM|
Try edelbrock 1484 throttle arm adapter and a 8018 tv stud. It is adaptable to alot of carbs.
However I would avoid a predator carb for any use.
|08-03-2012 07:47 PM|
yes.i do alot of four wheeling.but my tranny is a 700r4 from TCI. and it has an tv cable.
|08-03-2012 05:48 PM|
|vinniekq2||Ive had a predator carb sitting in my shop since the late 70s.I think a few of us tried it for a day.are you sure you want one?|
|08-03-2012 05:01 PM|
predator carb help
i am looking to buy a predator carb.the problem is there is no spot to hook up the tv cable from tranny.any suggestions?