|04-03-2016 08:09 PM|
|03-29-2016 02:53 PM|
|TugboatBill||Again, back from the dead.|
|03-29-2016 11:48 AM|
I did that, It works for about 7 or 8 years. (had it professionally done) The expansion rates of the foam/vinyl and the bedliner are too different, it will crack anyway. pic
P.S. I reply to old posts because if I found it someone else that needs it can too.
|12-28-2012 08:15 AM|
|poncho62||I read all the threads that you read......like I said...take it for what its worth......If you don't think its worth absorbing.....DON'T|
|12-28-2012 08:05 AM|
as far as your last line, the posts would say otherwise
|12-28-2012 07:49 AM|
|poncho62||We dont "toss" posts on this forum.......We leave it up or members to decide what they want to believe due to whatever is posted....They are mature enough to figure good info from bad.|
|12-28-2012 07:37 AM|
I think in this case of protecting your rep. it should be .
as it's way to easy to bash a vendor..
the o/p never put up photo's of the said dash..
and because he didn't show any proof, and the bash shows up in search. maybe it should be tossed.. or at least a mod's note that there was no proof show, and take the post for what it is..
I have a just dash 3 gauge pod dash cover for my 71 c-10 it's almost 10 y/o and still looks new
|12-28-2012 05:59 AM|
|cobalt327||That may work in some cases, but the F-cars I've had and worked on don't have a solid metal dash under the vinyl.|
|12-28-2012 04:33 AM|
I just remove all the vinyl and paint the steel the same color as the rest of the dash in semi-gloss... Padded dashes look cheesy in my book...
A grand for a padded dash, I don't think so....
|08-13-2012 05:40 PM|
FWIW, I sent Just Dashes a totally worn out, cracked, thrashed, piece of junk Trans Am dash for a buddy of mine. This was back in about '90 or so.
I had heard of them but had not seen any of their work in person, so needless to say I was a little concerned. IIRC the cost was around $400 but I could be off on that as it wasn't my dime, so to speak.
In any event, the dash we got back was better than original and there were no problems w/it in any regard. I hope the new management/process changes result in as good of a dash as what I received.
|08-13-2012 05:32 PM|
|LATECH||Talk is cheap. It aint over till the fat broad sings.|
|08-13-2012 02:12 PM|
|poncho62||welcome...thanks for posting and answering some very old questions (original post is 10 years old)......However, commercial advertising is not allowed on the board...thanks|
|08-13-2012 02:02 PM|
Things have changed...
Hi Hot Rodders,
Just Dashes has been in the classic automotive restoration industry for 30+ years, and we've gone through management and process changes since this post was created. I can assure all our future customers that we have a very strict restoration and quality control process. With regard to our restoration process, we NEVER make a core swap without consulting our customer first. As soon as a package comes into our shop the first thing we do is write our customer's name on the parts and photograph all contents of the box.
Every restoration job is unique and handled a little differently from the next. For Late 50's to early 60's Cadillacs specifically we take off ALL the old material (vinyl and foam), and bead blast or deep clean the frame depending on the frame condition. After bead blasting we lay down a new foundation of high density polyethylene foam and then vaccuum form a skin of vinyl around the newly foamed structure. From there we put the parts through an extensive vinyl dying process, to make the part whatever color our customer needs. If our customer is not happy with a color we mix for them, we are more than happy to take care of the issue and get them what they want.
I hope I've addressed any and all issues that have been brought up here. I'll be keeping my eye on this post, if any of you have any questions.
The Guys at Just Dashes
|08-09-2011 06:44 AM|
|pepi||They went out to the street to settle things right, only one came back.|
|08-09-2011 06:23 AM|
|Old Fool||The OP never posted the outcome, this thread is worthless without the "rest of the story"|
|This thread has more than 15 replies. Click here to review the whole thread.|