|08-14-2012 10:03 PM|
heads for 383 chevy
Check out the prices on these heads. RHS 12056-01 HYD flat tappet .560 lift, 220 intake runners, assembled. RHS 12060-01 HYD flat tappet .560 lift 235 intake runners, assembled same price. IDK if your camshaft is large enough for the 235's. RHS Small Block Chevy heads - Competition Components
|08-14-2012 09:54 PM|
|7178Chevyman||That's what I thought, now my only concern is will I have piston to valve clearance using a 2.08 valves?|
|08-14-2012 09:16 PM|
|bigdog7373||I like the patriots. Same specs as the more expensive brands. Only reason they're cheaper is because you're not getting the big name that goes witht the higher cost pieces.|
|08-14-2012 08:54 PM|
|7178Chevyman||The cam is crane energize .500/.500 valve lift 246@.050 302 adv. Rpm range 3500-6500, I have been looking hard at patriots|
|08-14-2012 08:46 PM|
Op can you give us a link to the cam specs?
|08-14-2012 08:43 PM|
for ar ace engine,buy the heads first then match the cam to the head flow numbers.
What bracket is your car in? what kind of car?
|08-14-2012 08:05 PM|
Procomp 210's, buy them bare, assemble and check everything yourself. Clean up the casting and bowl area.
if you have the money large port vortec heads are great too.
|08-14-2012 07:29 PM|
|bigdog7373||I've heard good things about Dart heads. But if you're on a budget a lot of guys use the Patriot freedom series 800 bucks ready to run is hard to beat.|
|08-14-2012 07:19 PM|
|7178Chevyman||Yes I lack the heads and intake, I'm just not sure about what head to use|
|08-14-2012 04:17 PM|
|bigdog7373||With that compression i'll assume it's a race engine. Do you already have the parts?|
|08-14-2012 04:14 PM|
how's my 383 build going??
Scat9000 crank scat pro comp I beam 7/16 screw, icon forged flat tops, 11.1 w/64cc heads, this is a 383 stroker the rods are 6", my question is what type of head to use with my setup its going to be a bracket motor,I already have a .500/.500 246@.050 302 advertised flat tapet cam I plan on using. Thank you all , any info appreciated