|08-20-2012 12:41 AM|
|Toto||Bold pattern will be chozen according the wheel pattern|
|08-19-2012 04:30 PM|
More important things!
Short and wide, short and narrow, tall and wide or tall and skinny.
Do you have disc brakes?
What bolt pattern do you have?
|08-19-2012 01:33 PM|
|Toto||Gho's, that's so simple! Thank's!! will do this!|
|08-19-2012 01:31 PM|
|mmadden55||Do you have a wheel that fits now? If so pull it off and measure the backspace with a ruler. Lay the rim facedown and lay a straight edge across the back of the rim. Measure from the back of the bolt face to the bottom of the straight edge. That is how much backspace you have.|
|08-19-2012 01:16 PM|
|Toto||I was afraid I would get that answer...as the wheels are 200 miles from my home, I don't feel much for a wasted trip|
|08-19-2012 11:31 AM|
|abbazabba||Your going to have to bolt them to the axle and see if they clear. That's the only way to be sure.|
|08-19-2012 07:48 AM|
Do these wheels fit
Can anyone tell me if a 3 3/4 offset wheel fits under the fenders of a '37 chevy? I can pursage a set for a reasonable amount but I want to be shure they fit under it before I spend some money...