|09-15-2012 10:24 AM|
|vinniekq2||If your rev limiter is wrong,at least its wrong the correct way.You will need to test your tach against anothet tach and see if they agree or not.|
|09-15-2012 07:45 AM|
Rev Limiter question
Either my tach is off or the Pertronix limits revs sooner than I expected. I have the Pertronix III ignition system with built-in rev limiter.
If I set the rev limiter to 6,200, the engine will cutout at around 5,800. 6,700 it cuts out at about 6,400-6,500.
Which is correct, the Tach or the rev limiter?