|09-16-2012 07:41 PM|
|Schaefs||Definitely exterior visor. I like the idea of a roof section! Awesome idea!|
|09-16-2012 07:11 PM|
I was thinking of an exterior visor,/ ? you could start with a section of a roof from some other car, hand form and wire the edge, just a lot of time with a ding hammer.
|09-16-2012 06:49 PM|
|bob70||A quick look at Chevs of the 40s does not specify truck or car for 38 Chevy sunvisor, so maybe it's the same. Quite pricey, though. I suspect one could fairly easily adapt something from any number of junkyard sources unless you are determined to stay original. I'm assuming you are referring to interior visor.|
|09-16-2012 06:47 PM|
There are some visors that are model specific. fit certain years, bodies , others were universal, one I have has a 6 in wide stainless center section and the side pieces slide into it, the mounting brackets have slots and a few holes. Build your own? Check out the metal working sites Metalmeet. all metal shapers etc , David gardiner in england has built a lot of things with simple metal tools, also check out the eBook here on HR, the scratch built hotrod. Cboy has lot of good info.
|09-16-2012 06:01 PM|
38 chevy pickup
I got a 38 Chevy pickup and looking if there is a visor for it or if a visor off a car would fit? If anyone has any tips please let me know.