|10-02-2012 10:10 PM|
|snoplow||Good news.. I got in and the trunk is full of parts. That makes me smile a bit. I ended up beating a chisle into the lock and turning it with a wrench until the latch released.thank you all for your suggestions.|
|09-21-2012 09:00 AM|
|snoplow||truth be i havent had time to try any of the suggestions above except try random keys. I have a bunch but none of them fit the bill. Going through the back seat ( I may have no choice) will be a pain in the ***** because i am thinkin i filled the trunk up with all of the trim panels and odds and ends from the car, or at least i am hoping i did. but i was 14 when i took everything off which i am regretting now.|
|09-21-2012 08:54 AM|
|09-20-2012 04:55 PM|
|09-19-2012 03:22 PM|
|T-bucket23||Through the back seat is the easiest way. You should be able to turn the latch with a long screwdriver or pop the clip off the lock and pull it out and open it from outside. If it has not been unlocked in 14 years the lock probably would not work even if you had the key.|
|09-19-2012 02:12 PM|
used car mechanic.
I had a friend that worked winters in Calif as a used car mechanic, He had a bucket of keys, 3/4 of the time we could find a key that would work.
|09-19-2012 09:54 AM|
If you know someone with an old set of late 50s door keys...I mean old, almost worn smooth...these will usually open a door with a little massaging from a file
I had a real locksmith make a set of keys for my dads car; he did it right out of his van in 10 minutes. He had a book that had the standard chevy profiles they used, and theres a number stamped on the key which somehow tells him how to stamp the profile on the key. He even had the old sombrero hat key blanks. I think it cost me $50 and a submarine sandwich.
Word to the wise, I did climb though the partition behind the rear seat backrest (I used to be 5' 10 and 140pds in high school) Its very dark, very cramped and by the time you go through what cobalt described, holding a maglite in your teeth...call the locksmith.
Can you call triple-A? I doubt they can pick a lock but worth a shot.
BTW that torsion bar that opens the trunklid? I was riding in the backseat when it broke and it sounded like a 12 gauge went off in the trunk.
|09-19-2012 09:39 AM|
If you can find a key that fits the lock, chances are there will be at least one pin you removed from the lock that'll match up to one position on the key (or you can carefully grind one or more of your pins to fit the key). This will allow the "new" key to work as it normally would and will keep someone from casually opening the trunk.
Or once the lock is in your hand, it can be rekeyed for a relatively cheap price compared to having a locksmith come to you or to remove the lock for you.
|09-19-2012 09:39 AM|
First off from back seat to trunk latch its about 6 or 7 feet. Very hard to reach. You can't just open it with screwdriver. If I remember there are 2 bolts that hold latch part to body. you need a very long extension. I'd take out glove box lock or door lock and take and get a key made.
|09-19-2012 09:12 AM|
|09-19-2012 08:14 AM|
A lock smith will have a pile of keys and just try one after another. Back then there really weren't very many cuts and in a little while you find a key that works. I did this myself one time with a 64 Impala my brother brought home, had a ring of keys and I found one that worked on about the fifth try.
|09-19-2012 06:20 AM|
|va4cqd||get a locksmith|
|09-18-2012 08:53 PM|
|snoplow||I have not tried going through the back seat yet..I know that the trunk has been closed for about 14 years...I didn't know if there was a rodders trick to popping the lock other than just picking it cuz I don't know how..I do appreciate all of the fast responses.. I will try and pu 'll the back seat apart andvtry to get in that way. Thank you|
|09-18-2012 08:34 PM|
|Richiehd||Can you remove the backseat and with a very long screwdriver turn the tumbler from inside?|
|09-18-2012 08:33 PM|
back seat access
take out the back seat, usually not a solid panel. if you can not reach make a super long, screwdriver.
|This thread has more than 15 replies. Click here to review the whole thread.|