Hot Rod Forum banner

Urgent drum identification help needed-Ford 9" diff!

4K views 11 replies 3 participants last post by  turbovanman 
#1 ·
Working on an old Hotrod with a 9" Ford diff, I CAN NOT find drums for it, I've got the poor parts guy beating his head against a wall, must have sent me a dozen drums-they are either the wrong size bolt pattern or the drum is too small, or not as wide as this one.

Its 11" drum, 2.5" shoes, double scalloped and aprox 4.5" tall, numbers on the drum are "MW 37456R D60A 1126 A"

I googled the part number and got nothing.

Its a 28 spline axle, 5x41/2 bolt pattern, 2 3/4 centering hole, uses a sealed axle bearing, #RW207CCRA

I want this damn thing off my hoist, took me 3 days to find an axle, sign.

I found a drum that fits but larger bolt pattern, if I can't find anything in a few hours, going to redrill the bolt pattern.

Thanks.

Simon
 
#10 ·
If you get lucky the tag will still be on the 3rd member and from that we might be able to tell just where the rear came from and from there get the correct drums..But then who knows what has happened in the past..

Sam
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top