Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Body - Exterior> A trick I do for hanging doors
User Name
Password
lost password?   |   register now

Thread: A trick I do for hanging doors Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
09-25-2012 05:10 AM
jcclark Also:
I usually drill a 1/8" hole through the hinge before removing them.
When I reinstall I insert a 1/8" drill bit or rod and it gets me back
to original alignment pretty fast.
09-24-2012 10:33 PM
Lizer
Quote:
Originally Posted by MARTINSR View Post
Good idea, I'm thinking then remove one of them on each hinge and put a bolt to tighten as you adjust the door then remove the other studs, very good idea.

Brian
yep. As you can see there are only two studs per hinge. Since two of the three are line up, the third one will be lined up as well to put the first bolt in the empty hole. Then just go around, remove the studs and replacing with the bolt.
09-24-2012 10:12 PM
tech69 good idea, and reminds me of drilling holes in the hinges and using punches to re-align it up. Sort of the same concept. You can also lay it in it's hole and latch it shut and your holes will be lined up or close enough to get bolts in. I do that once in a while, mainly on pillar jobs where I have to pull where the door mounts and then you want to mock it up to see how it fits around your a-pillar/rocker/etc after you have pulled. With the car on the rack, a gutted door that's light, and no one to help, latching it shut works pretty good.
09-24-2012 10:10 PM
MARTINSR Good idea, I'm thinking then remove one of them on each hinge and put a bolt to tighten as you adjust the door then remove the other studs, very good idea.

Brian
09-24-2012 09:50 PM
Lizer
A trick I do for hanging doors

Thought I'd just post a trick I do when I'm hanging the doors on my 67 Mustang. Anybody familiar with these know the threaded metal plate behind the door jamb isn't always attached and can fall down.

I cut the head off some 5/16-18 bolts and screw them in loosely. They serve three functions:

1. Serve as guides for setting the hinges on
2. Prevent the metal plate from falling
3. Give you leverage to move the plate around to line it up with the bolt.

By the way, these same bolts will also work great for when you need to set an intake manifold on top of the engine. Screw these in to the top of the block at each corner and use them as a guide. Will set the intake down perfectly straight.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 02:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.