Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Garage - Tools> help with new compressor
User Name
Password
lost password?   |   register now

Thread: help with new compressor Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
10-02-2012 09:35 AM
Old Fool
Quote:
Originally Posted by cutthroatkid View Post
so I just bought a new compressor&I need some help...it a 60 gallon single stage dual head cast iron puma compressor...The store wasn't very helpful&had ZERO paperwork on it.I know its a 6hp but is 3hp running&believe but not certain it runs@175 max psi.There not a adjustable gauge on it like on my other one to set the psi.
So here are my questions do I just run a separate gauge for the actually I know I do just how do I add it?Also not sure of What type of plumbing I should use I currently use a small oil/moisture seperator &a small filter that attaches to the end of my hvlp gun.
I know that's not enough What do You recommend?Also it seems I need to hardware this thing straight to my box in my shop.Any help would be greatly appreciated
Google the model number and download the O&M manual for it
10-02-2012 09:31 AM
Old Fool
Quote:
Originally Posted by cobalt327 View Post
I have noticed through the years that you have always given guys good solid info along w/safety info on air compressors, I just want to say good job. Prolly saved someone from injury- or worse.
Thank you for the kind words. I would be the happiest man in the world if any of my safety Nazi advice were to save one person injury, but we will never know.

Flash back: march 1974, OF was Young Fart, crashed 73 Z/28.
Was in hospital 2 weeks.
Had semi private room, other bed was occupied by a guy whose name is now forgotten.
He had rigged up a hot water tank as a pressure storage tank for his home made compressed air system. ( which in itself can be safely done)
He had NO safety relief valve on the system. the pressure shut off switch failed and well you know the rest of the story.
He dam near lost both legs from the tank exploding.

From that 2 week stay in the hospital I learned and reaffirmed that safety comes first.
Both of us were lucky to be able to walk out of that place , thanks in part to the good doctors and the good Lord.
10-01-2012 09:12 AM
boatbob2
New compressors.......

Hi,when i plumb a new compressor,near the top ,where the outlet is,i use galvanized pipe to make a long U shape down,,about 4 foot long,6inches across,then add a drain valve there,then back up to the height of the original outlet,with another drain,then thats where my air hose goes,so i have 3 places to catch and drain water,overkill im sure,but,only a VERY small amount of water gets by,,just before spraying I use an aluminum toilet paper filter to catch the remaining water...
10-01-2012 07:36 AM
cobalt327
Quote:
Originally Posted by Old Fool View Post
Good basic installation, Air Piping Layout
I have noticed through the years that you have always given guys good solid info along w/safety info on air compressors, I just want to say good job. Prolly saved someone from injury- or worse.
10-01-2012 07:33 AM
Old Fool Good basic installation, Air Piping Layout
09-30-2012 04:32 PM
cutthroatkid where I live no codes on nothing residential only commercial.There is a valve on the side for on off,there's also a drain on the bottom that's a valve soo much better Then having to unscrew like on my old set up.So I run the regulator out the side&Then out of that my air outlet?
09-30-2012 04:14 PM
BOBCRMAN@aol.com Run an accessable drain on the bottom of the tank. Best to use a good on/off ball valve. Or a bit more expensive, as on my system. A valve that opens automatically any time pressure gets below 10 lbs. ( from a semi-truck).
You will have an outlet on the side of the tank for pressure air. Run an air/water seperator and regulator from this outlet. For a direct hose connection.
If you hard plumb lines. Make sure all lines drain back to compressor. Put a regulator/filter at each outlet.

Wiring electricity depends on local codes. Here at home, I use no.10 Romex and a 20 amp 220 breaker in the box.
09-30-2012 03:10 PM
cutthroatkid
help with new compressor

so I just bought a new compressor&I need some help...it a 60 gallon single stage dual head cast iron puma compressor...The store wasn't very helpful&had ZERO paperwork on it.I know its a 6hp but is 3hp running&believe but not certain it runs@175 max psi.There not a adjustable gauge on it like on my other one to set the psi.
So here are my questions do I just run a separate gauge for the actually I know I do just how do I add it?Also not sure of What type of plumbing I should use I currently use a small oil/moisture seperator &a small filter that attaches to the end of my hvlp gun.
I know that's not enough What do You recommend?Also it seems I need to hardware this thing straight to my box in my shop.Any help would be greatly appreciated

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 06:22 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.