Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic -- Hot Rod Forum

Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Transmission - Rearend> T-350 problems
User Name
lost password?   |   register now

Thread: T-350 problems Reply to Thread
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Please select your insurance company (Optional)


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Additional Options
Miscellaneous Options

Topic Review (Newest First)
10-16-2012 03:39 PM
chuck M So i recieved a vacuum modulater inner valve today and popped it in. Problem solved. There was not one there originally when we rebuilt it so one didnt go back. Can you say inexperianced, lol. Thanks for all of your help fellas.
10-12-2012 07:16 AM
chuck M Ok so i just talked to a trans shop and I think we figured it out. I have heard of people taking the springs out behind the vacumm module so when i saw nothing there when i had the pan off last night I didn't think much of it. What i didn't pay attention to was that there was no valve there either. Stupid mistake on my part but thats what you get when you are inexperienced as I'am. I have a valve on the way and am crossing my fingers. Love learning the hard way. I will repost once i have installed the vacuum module valve.
10-12-2012 05:46 AM
chuck M Ok guys i installed the transgo kit and it changed absolutely nothing. I am stumped. Detent is set properly and still no downshift. still shifts at the same point no matter if im just easing on the throttle or wot. Driving me nuts. Any ideas?
10-05-2012 08:38 PM
pricesgarages good luck the purpose of the springs is to provide smother shifts
10-04-2012 05:06 AM
chuck M Yeah the 1-2 acumulater spring in the side of the case is already out and i was going to take out the 2-3 in the valve body as well. I didnt know that the spring in the 2-3 in the valve body could be left out on the first go around. i can definetly tell a difference between 1-2 shift firmness from 2-3 because that spring is not there. I feel alot more confident this time in taking the valve body off due to research on this site, before i relied on my buddies knowledge which when i asked "what does this do " he replied "I dont know". this forum is awesome. Thank you
10-03-2012 08:03 PM
pricesgarages couple things to do while apart remove the gov filter it a small thimble at the rear of the case under the seperator plate if your wwanting firmer shifts remove the spring in the valve body under the pliston held on with a e clip and the spring in the side of the case combined with the kit that makes a 350 work great
10-03-2012 03:04 PM
chuck M Thank you very much for your responses. I ordered the shift kit and will check the separator gaskets. I will have another chance at the gaskets if they are in fact backwards with this kit. As soon as the kit comes in i will post my findings. Thanks guys
10-02-2012 09:49 PM
Crosley Is it possible you installed the valve body - separator gaskets backwards?
10-02-2012 07:55 PM
pricesgarages id try another governer thats never been altered remove the spring from the modulator valve pick up a trns go sk 350 kit there cheap and give u springs and appilacton chart i use them on all rebuilds less than 40.00 pn sk 350 from trans go
10-02-2012 05:42 PM
chuck M
T-350 problems

Hello, Was wondering if anybody could shed light on this problem i'm having with my th350. Just rebuilt the trans it's a non lockup. Installed a new vac modulator. Truck drives and shifts but it shifts really early at low speeds. I turned the screw in inside the end of the vac mod and not much if anything happened. I then removed one spring from the governor and test drove. It shifted later so i think im going to get a governor kit from B&M to tune the shifts where i want them. Finally to my prob, i installed a new detent cable and adjusted it properly with my foot on the pedal at wot. The cable is pulling correctly but the trans wont downshift at any speed at wot. I even went as far as to pull the cable up through a hole in the floor and pulled it by hand while driving and nothing. the valve was free in the valve body when i just had it off and i can feel it open and close when i pull the cable. LOST

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -6. The time now is 01:27 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999 - 2012. All Rights Reserved.