|10-09-2012 08:52 PM|
Lots and Lots of Info on the HAMB. the posters there said granada-monarch, 5 bolt maveric, etc will drop 1 1/2 inches
|10-09-2012 08:40 PM|
A couple guys on the HAMB web site have used Granada, Monarch , spindles for disc brake swap. they did not say if it dropped the front end, that required taper reaming the lower hole. also someone said that 80's LTD are a bolt in .
Go the the Hamb site and search 55 ford disc brake conversion, send them a Pm question about drop.
|10-09-2012 04:44 PM|
Drop Front suspension for 55 ford Customline
Has anybody know of a drop front end kit to fit my 55 customline, Its bone stock with I6. Starting the project of turning it into a street rod. I want power steering & brakes along with this. (engine & trans later)