|10-18-2012 10:18 AM|
So I put a call into monster transmissions where I got my kit. Rebuilder there says to just leave it out.
I have been thinking about it and I think it will stay on the bench.
No reason to have it in there when my trans is freshly rebuilt and I can be positive that it is totally clean and particle free.
Thanks for the help.
|10-17-2012 08:04 PM|
|SSedan64||I can't say yes or no. I do know many screens get left out, it may not be needed but. I'd wait for one of the Builders more familiar with the 60E to chime in, or try doing a search, it may come up. ( TCC Screen )|
|10-17-2012 07:19 PM|
Okay wow. I see that in the manual now.
So SSedan, thats a vote for putting the filter in the case?
|10-17-2012 07:13 PM|
There is a TCC screen shown in that area, bottom of Pump.
Part #92, Figure 179, Pg. 100 in ATSG Manual.
#014 here >> https://www.wittrans.com/Schematic.a...0E&Schematic=5
|10-17-2012 07:03 PM|
A little info
Shoot! I forgot..
98 chevy K1500
|10-17-2012 06:53 PM|
4l60E screen filter...Where does it go?
So it seems I have a different style lock-up solenoid on the new wiring.
The first picture is my old lock-up solenoid it has a "t" shape at the end and twists into the solenoid.
The second picture is my new lock-up solenoid. I have a screen filter in my kit that fits okay in the solenoid.
The third picture is where the filter actually fits the best, in the case. I understand that at some point there was a filter in that location.
A little help would be greatly appreciated.