|Today 12:33 AM|
Been trying to figure this darned transmission out and get it put back together and bolted back up.
I stubbornly refuse to do anything else until this thing is done. Plus, all the bolts, brackets and everything else is right where I need them when I'm ready to bolt it back in. If I move anything I may never find what I'm looking for. Meanwhile the shop is a mess and I have upholstery to tackle next.
Time for a bigger shop!
|Yesterday 10:39 PM|
I finished up and mounted my pesky rad support ( thanks to Brain's pics )
and finally got oil to the top of that 235.
Nothing 1800psi of compressed nitrogen blowing backwards couldn't fix! I had something in the engine block journal pulled up. No idea what. But when that 1800psi went through, the oil pump made a bad bad sound. I think I had it spinning backwards, kinda might have dried up the pump. LOL, it is all good now.
|Yesterday 10:11 PM|
|Yesterday 09:12 PM|
|gearheadslife||not blending into hood?|
|Yesterday 09:00 PM|
|tech69||feeling very lucky my ankle is somehow feeling a lot better. I think tomorrow I might be able to get back into the garage after work, but man it feels so good to just lift my feet up and not have anyone expect you to do something, so I'm gonna milk it for one more day. It looks really purple though but looks worse than it feels, but still very tender. The Avenger left and the customer was happy but I wasn't cause I only focus on what I need to improve on. Anyhow, tomorrow I paint a silver focus with Martin's idea of blending on a stand. Front door getting completely painted, fender completely painted, and then the blend will go from the front door to back. Will try everything as I would if it were on the car and will post the results when it's put together. Lot of painting tomorrow and the boss loves this idea.|
|Yesterday 08:58 PM|
John, that floor is looking absolutely beautiful!
I got out there tonight and sanded my glovebox to paint. I also dug into my stock (if you only knew how much I had, kinda crazy) I found that I had a quart of SEM "Trim black" (Unopened!) and that is what I am going to use. I'll be damned if I am going to go buy something.
|Yesterday 07:50 PM|
LOL, My blood running off the panel does not show in this picture. It is OK, I can spare a little.
Getting close to being ready to drill for my plug welds and cutting out for the body mount but going to go,ahead and make the other side first in case this needs to be tweaked more than I expect.
|Yesterday 06:57 PM|
|496CHEVY3100||The 57 black widow used them on nascar|
|Yesterday 05:03 PM|
|Dragonoake||1957 Chevrolet Stock Car Competition Guide|
|Yesterday 04:43 PM|
|Too Many Projects|
|Yesterday 12:09 PM|
Having a bit of trouble getting these pics to show......?
Been working 12 hr days in cabinet shop.........But,enough time between coats of finish to get some fabricating done.This is a control bx enclosure for a shaper.Moved from down on the side to up top....being lazy,don't want to have to reach.Hall table is the last of a dz.
10G,Tig welded,almost ready to send to paint.
|Yesterday 07:23 AM|
I guess that would be bailing wire.
|Yesterday 07:01 AM|
Actually I believe Rambler was using Sky Hooks at that period of time.
|Yesterday 06:11 AM|
|Yesterday 06:05 AM|
|Too Many Projects|
|This thread has more than 15 replies. Click here to review the whole thread.|