|10-20-2012 08:19 PM|
|S10 Racer||We use Taylor wires on our sprint cars, no problems yet. But we run a mag and not a distributor.|
|10-20-2012 08:05 PM|
|vinniekq2||Aurora wires are very good|
|10-20-2012 08:03 PM|
I used to use Moroso wires, but with upgrading the spark box for Racing, I started getting crossfire. Went with Taylor "409" wire on both engines and haven't had a problem since. If you walk around the pits, at a drag strip, you'l find most of the serious racers use Taylor.
|10-20-2012 05:38 PM|
Not good luck with Taylor or Accel spark plug wires.
Good luck with GM and MSD and Prestolite.
|10-20-2012 04:09 PM|
|Oldguy48||I ended up with a set of Moroso wires. Previously, I tried using a set of AutoZone wires, then a set of Bosch wires (both supposedly good quality). Both were junk. Got a set of Morosos, and have had no problem at all.|
|10-20-2012 04:01 PM|
Plug Wire Suggestions
Anyone have any input on plug wire selection? I am currently using Mallory 8mm, but they are in need of replacement and I'm not sure how much value there is going from a $40 set to a $90 set. I'm running a 302 with TF aluminum heads, a fat cam and Mallory HP no point ignition setup.