|10-23-2012 05:40 PM|
|EOD Guy||X3..... it might be bolted to the column by 2 bolts/screws...... mark the switch's position before you remove them, it helps getting it back in the right spot when re-installing|
|10-23-2012 05:09 PM|
now if you mean the lock cyl. we need to know tilt or non tilt
|10-23-2012 05:02 PM|
|poncho62||Usually on a GM, the switch itself is under the column near the brake pedal. It is built into the neutral safety switch. A rod runs up from it to the key.|
|10-23-2012 04:46 PM|
how do you get the steering column apart to get to the starter switch on an 82 chevy pickup?