|11-03-2012 07:21 AM|
I'll take a car you can drive over a pimped out trailer queen anyday... just don't see the point in them... but I'm just a regular guy. Even more fun when you drive your ride to a show and send them packin' back to the trailer with a second place trophy... it's happened a couple times...
|11-02-2012 11:34 PM|
|old guy||Thank you, Thank you I'm a newby and just up to my eyeballs in my 64vett project (strip then fix)and these little tips are my saving grace since I have the panels off and next the doors but the big deal at this time is striping and body repair while supporting these things properly.|
|10-27-2012 09:56 AM|
|tech69||not one that comes off easily either. What I thought made up for it is that he's gonna drive it everyday and enjoy it, which is rare when restorations get into the 6 digits. I seen too many cars leave here in a trailor and it's admirable that this guy has the balls to drive it out of here.|
|10-27-2012 05:57 AM|
|novafreek6872||BIKE RACK??!! SAY IT AIN'T SO !!!|
|10-26-2012 08:51 PM|
thanks Martin! Today we put in the fender aprons and new aluminum core support. The Core support looks so dinky but cool looking at the same time. Also found out the customer is blowing it by getting a custom bike rack for the car that's a bolt in one and a custom matching mountain bike. Would have been cooler with a low rider bike but oh well.
|10-26-2012 07:59 AM|
Excellent information there Henry, and very nice work editing and such, VERY nice.
|10-25-2012 03:00 PM|
|novafreek6872||WOW! That is some serious mirror finish there... Nice job|
|10-25-2012 11:48 AM|
new video up on blocking primer on decklids/hoods and the tape trick
episode 43/ prime blocking hoods and decklids - YouTube
what I'd like to mention about this video is that it's really important to put hoods and decklids on stands in a particular way. In this video I'm finding out that when I did the decklid in filler I had it on the stand wrong. This is how I had it on the stand...
Notice the weight towards the rear? So when I sanded my filler with the decklid on the stand like that I remember two areas where the greener filler underneith was exposing it self from under the top coat of filler. These two areas were right where the majority of weight is being supported on the stand. I didn't think anything of it cause guidecoat and a handfeel told me it was straight. So then it goes and gets primed and comes back to me. I then had it primarily the same way on the stand but maybe a little different, different enough to no longer push up on those two areas where I saw green filler poking up. So after blocking out the first round of primer I realized those same areas that were high were now low spots. The fix was to fill it but also take the weight off the shell of the decklid then block it out and carry on with that for the rest of the process. here's how it was on the stand to finalize it...
Didn't have that problem with the hood as it wasn't as heavy and the stands were properly placed and only touching the edges of the shell.