Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Transmission - Rearend> How much atf should my ford c6 take
User Name
Password
lost password?   |   register now

Thread: How much atf should my ford c6 take Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
11-12-2012 12:55 PM
Trucknut I think your C-6 should take about 11 quarts with the convertor.
11-12-2012 12:52 PM
Trucknut I had to put fluid in the new convertor on my Pontiac before installed the convertor and trans. The guy that built it insisted that I did.
11-12-2012 10:31 AM
unclebill
Quote:
Originally Posted by 66GMC View Post
C-6's usually have a removable plug on the convertor, which can be accessed through the back side of the flex-plate.

.
mine didnt. i wish it did.....
11-11-2012 05:20 PM
66GMC IMO, do not overfill it at any time.

Did you drain the convertor or did you just drop the pan?
C-6's usually have a removable plug on the convertor, which can be accessed through the back side of the flex-plate.

As far as plumbing you trans cooler:

Quote:
Automatic transmission cooler guide and installation

Transmission Cooler Quick Guide & installation
The most often asked question is should I bypass the radiator cooler when I install a auxillary cooler.
Most cooler manufactures and automobile manufactures information we have read, recommends installing the coolers In-Series with the factory radiator cooler for maxium cooling efficiency.
So unless the manufactures who have spent 1000's of hours testing different installations are wrong, the suggested cooler installation is in-series......
Transmission > Radiator cooler > Auxillary cooler > then Back to the transmission.
If you must bypass the radiator because the cooler tube is leaking or for other reasons, be sure to increase the size cooler you install by 1 to 2 sizes.
When I worked for Ford, I recall a TSB advising that dealers should always install an "H-Fitting" in the line if the vehicle was equipped with a tranny cooler, particulary in cold-climate regions like ours.

This fitting was designed so that the tranny would not be starved for oil due to cold-temperature oil viscosity. Tru-Cool brand coolers have a similar technology built right into their "LPD" series.
11-11-2012 03:27 PM
mustang 671 ok will try that . do you reckon even though i am seeing the max level once i start adding more it will feed its way around . also does the c6 feed out and then return through the trans cooler itself ?

cheers
11-11-2012 03:18 PM
unclebill
Quote:
Originally Posted by mustang 671 View Post
wow , i thought as much , so how can i get it to drop the level so i can add more ? or would you keep adding even though it measures max on the level line ??
the torque converter takes maybe about 1/2 of the total fluid.(just guessing on that one)
i would imagine run it and keep a fillin.
11-11-2012 03:03 PM
mustang 671 wow , i thought as much , so how can i get it to drop the level so i can add more ? or would you keep adding even though it measures max on the level line ??
11-11-2012 02:55 PM
unclebill my 1981 c6 takes 25 pints.
25 pints = 11.8294 liters
11-11-2012 02:19 PM
mustang 671 hi all . i had the car running today jacked up on axle stands . run through all of the gears and in reverse . its taken around 6 liters . my concern is that i thought it takes more ? and i also have a trans cooler in front of my radiator . albiet its small .

so will the gearbox fluid - pump around the external cooler raditor ok ?

cheers
11-02-2012 05:16 PM
prostreet6t9 Put the rear on jack stands
put 4 quarts in
Start in the N position
Fill to the add line

Check operation of trans and then top off.
11-02-2012 05:06 PM
mustang 671 Just did a search on the forum and found a post that states around 13 quarts, well 1 q is 1.13 litres , and i have around 6l so far and seems to have another 8 odd litres to go. If this is the case how do i get it to work around the auto box ? Do i just keep adding or do i wait until it shows on the dip stick that it needs more. Am afraid to run it dry
11-02-2012 05:00 PM
mustang 671
How much atf should my ford c6 take

Hi all . I am now running in my trans with the wheels off and axle jacked up as its never had any use since the rebuild. I have a oil cooler to the front of the car ( radiator type ) i currently have around 6 litres in it and have had it running through the gears but i have been told to check the level whilst its running ? Ie opposite to how you check the engine oil .

What do they normally hold ? Its a c6 with reverse shift pattern. B +m high stall torque converter @2800 rpm

cheers guys

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 06:12 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.