|11-12-2012 08:31 PM|
|prostreet6t9||Very true.. I just feel bad for the guys that are new to the sport and get a little ahead of themselves and have to buy them twice.|
|11-12-2012 08:16 PM|
One of the things the guys can do is get an old set for setting up and fitting and then buy the new belts when they are ready to go racing..Old belts should be cheap as they cannot be used anymore..Just an idea..
|11-12-2012 07:46 PM|
|11-07-2012 02:44 AM|
|11-04-2012 08:36 AM|
Try this. Auto Weld Chassis Components Racing Manufacturing Chassis Products, 9" Ford Housings, 2x3 2x4 Mandrel Bent Frame Bending Danville PA
I got the other address from their paperwork on the unit for my Stude gasser project. It had many different styles and proper design parameters.
Maybe this site address has the design/install pages somewhere.
|11-03-2012 09:14 PM|
|11-03-2012 08:52 PM|
|BOBCRMAN@aol.com||tips for design http://autoweldchassis.com/opts.invu|
|11-03-2012 04:36 PM|
X2 Tech... Our track here in oregon requires a Minimum cage at 11.99 for a full bodied car. You can run 12's all day long but once you get that 11.99 your sent home.
If you need the car to pass tech.. DONT buy your belts until your ready to go racing.
|11-03-2012 04:10 PM|
There is a rollbar and there is a rollcage.
The determination of which you need depends on the class you will be participating in or the Elapsed Time or Trap Speed you will attain. As a for-instance, a minimum 5-point rollbar with 5-point (SFI 16.1) safety belts is required at 11.49 or quicker. A minimum 6-point rollcage is required at 10.99 if the floor of the vehicle has been modified in excess of 4 square feet (not including tubs) or if the firewall has been altered in excess of 1 square foot. If the floor and/or firewall are unaltered beyond the figures I listed here, then a rollbar is legal to 10.00 E.T. and 134 mph.
A minimum 6-point rollcage is required on all vehicles at 9.99 or quicker and on all vehicles that go 135 mph or faster in the quarter mile.
Pony up 10 bucks and get yourself a NHRA Rulebook.....
Summit Racing® NHRA 2012 Rule Book SUM-NHRARB - SummitRacing.com
|11-03-2012 02:34 PM|
There is some pretty good weld together kits out there. Need to know how much cage do you need.
|11-03-2012 01:27 PM|
Moving to General Tech..What you need is the rulebook as there are diagrams for roll cages there to follow and you will have then a legal cage..
|11-03-2012 11:48 AM|
Roll cage ideas
I need some ideas for roll cages in a 1967 Nova.