Ok Guys got a few questions for you. Ive been reading a lot about this topic online and I have seen way to many people saying different things. First of all I have a 1994 c1500 5.7 TBI. Ok I have posted before about my vortec heads (906) and I want to put them on my 94 Truck. I have a intake for these heads, an aftermarket jegs intake. (non egr). So with that in mind my plan was to put all this on my truck and do away with the egr. Currently I have a cam in the truck already that was designed for Low end torque since I haul lots of wood I wanted a good setup. Not that the stock was bad but I like a little more performance. So here are my questions.
1. Will my computer work fine with this setup??
2. Can I do away with the egr as the intake I have is a non egr application??
Anything else you all have on this let me know as Im sure Im forgettin something.
Here are the cam and intake I have.
JEGS Performance Products 200102 JEGS Performance Hydraulic Flat Tappet Camshafts
JEGS Performance Products 513002 JEGS Champion Series 331 Performance Dual Plane Aluminum Intake Manifolds
Thanks Guys
1. Will my computer work fine with this setup??
2. Can I do away with the egr as the intake I have is a non egr application??
Anything else you all have on this let me know as Im sure Im forgettin something.
Here are the cam and intake I have.
JEGS Performance Products 200102 JEGS Performance Hydraulic Flat Tappet Camshafts
JEGS Performance Products 513002 JEGS Champion Series 331 Performance Dual Plane Aluminum Intake Manifolds
Thanks Guys