|11-11-2012 03:55 PM|
|11-10-2012 05:51 PM|
|11-10-2012 04:16 PM|
|azlogger||Aha! I just figured out that it will work after all to put the steering linkage in front on this car. which elimenates the need to go under the pan.|
|11-08-2012 11:19 PM|
the car pan is different..
the f body pan the sump area is farthar back than a vette pan 1980 vintage..
I'd get the pan you plan on using and get the measurements off that..
|11-08-2012 10:36 PM|
|azlogger||that's close enough for me thanks|
|11-08-2012 10:18 PM|
|11-08-2012 10:00 PM|
|BOBCRMAN@aol.com||There are many different stock SBC pans. You will have to be more specific.|
|11-08-2012 09:37 PM|
oil pan depth
Hi, i'm scratch-building a car and need to know how deep the oil pan on a 350 chevy is at the FRONT. My steering linkage will have to go under the pan just a few inches back. I know there's a lot of different pans out there but i'm talking about just a standard, stock chevy pan. thanks