|11-14-2012 08:38 PM|
|496CHEVY3100||Bill the sterring wheel is from a 66 chevelle look at chrome rings in wheel, horn button i think is a 66/67 nova, console came in impalas starting in65 thru 67 68were different i cannot tell difference in a 250 and a 230 like your car regardless of other jelous readers|
|11-12-2012 11:48 AM|
|BillToothaker||I am looking at some restoration sites for Impala & Chevelle, thanks guys! I have looked at the impala, but the shape of the console isn't quite right and the steering wheel is off- On to the Chevelles~!|
|11-12-2012 11:19 AM|
I was holding a console just like that one this past Sat.. Talking about installing a 3'' Tach in it.. For my friends 66 Chevelle..
|11-12-2012 11:12 AM|
console looks like impala mid 60's
tiller, also, but both could be chevelle parts,,
can't tell by the pic if the rear end has 2 upper links or one..
if brakes are 9x2 drums(rear) good chance it's a body parts, 11" think full sized,, looks like someone had a donor car, and used the rear crossmember for the rear end mounts, etc
|11-12-2012 11:01 AM|
|poncho62||I think you are right Randy......Either way, I think the 6cyl motor mounts would be the same|
|11-12-2012 10:10 AM|
|NEW INTERIORS||The console looks like a 60's chevelle console..As far as the body, That look's to be homemade..|
|11-12-2012 09:58 AM|
I think you're trying to buy the cart before the horse.
The motor mounts are the least of your worries. Looking at the rest of your pics I wonder how you plan on getting that death-trap licensed for the road.
|11-12-2012 09:58 AM|
ID Donor car
I will take it back down now that i at least have a year to go by- I went before but didn't know if we were looking for 60's or 70's, I will try an impala first, and a partial part #.
Thanks Again, go through this again when i need brake shoes.
|11-12-2012 09:44 AM|
|poncho62||Just go to NAPA and ask for a motor mount for a 65 Chevy with a six cylinder....Betcha thats the one....Take that one with you to compare|
|11-12-2012 09:33 AM|
In taking Pictures of the Motor Mount (with my glasses on-should wear these more!) there is a part number on the rubber 37-2404 - some symbol-1-4, Will will search this.
I have attched pictures still maybe someone identify it.
|11-12-2012 08:46 AM|
1965 c-10 230cid l6 mounts
1979 camaro 250cid l6 mount
maybe the mounts on yours looks like one of these..
iirc the top photo type is called a bisket and the bottom (camaro ) a clamshell
|11-12-2012 08:40 AM|
|poncho62||I am guessing 64-65 Chev Impala....Seeing as the engine checks out as a 65, I would be leaning that way|
|11-12-2012 08:39 AM|
|11-12-2012 08:33 AM|
ID Donor car
Here is the steering cap and more console pictures, i was hoping the console would give it away, someone would recognize it.
I think we figured at least the block was made 12/7/64, i have gotten conflicting infor on the head, the Block casting # shows is was done as a 230, but my machist said it was a 250 and rebuilt it as such, Which all doesn't really matter I need to figure out what model (s) of car it was in so I can narrow down the options to get replacement motor mounts.
thanks for your input!
|11-12-2012 07:32 AM|
What is the logo in the centre of the steering column?....Lots like a mid 60s GM to me.
230 and 250 Chevy six were basically the same engine
|This thread has more than 15 replies. Click here to review the whole thread.|