|11-18-2012 01:29 PM|
Your work is an inspiration! .....and thanks for all the advice and the youtubes you share with us!
|11-14-2012 11:16 PM|
Thanks. I wish it was a high dollar job cause there's a lot of little things I wish I could have spent more time on.
a couple of outside pics I took today.
|11-14-2012 09:54 PM|
|novafreek6872||The doors are so big and long on cars of that era, they really have to be "right" or it really stands out... anyway, from what I can see you did another great job on it. Looks super slick and nice gaps everywhere.|
|11-14-2012 08:17 PM|
It's a spot job. Tail light panel replacement. The primer you see is from fixing the kink in the quarter. That car is a beast performance wise.
The Gto came out pretty good for a prime once but the doors aren't up to snuff with the rest of the car. I'll make a video on it and why I think it didn't turn out as I would have liked. I guess I cherry picked the pics and showed "the good side"(lol).
|11-14-2012 05:10 PM|
|novafreek6872||Goat lookin good man...is that a Nova I spot in the backround? Is that your next victim??|
|11-14-2012 02:06 PM|
Here's some pics of the goat.
|11-08-2012 08:39 PM|
Heck, I prime a bunch of times and it still all ends up on the floor...
Kinda reminds me of the old carpenter joke... "I cut it three times and its still too short!"
What that has to do with this subject I have no idea... Thanks for the info on the "prime once"
Im glad you clarified b/c I was thinking MAACCO prep job!
|11-08-2012 10:30 AM|
OK, thanks for the clarification...then we are on the same page.
|11-08-2012 10:19 AM|
it will get probably 3 coats of primer, but in one session. Never one coat.
If it gets primed twice it will usually get two coats for each round, so 4 total coats.
|11-08-2012 10:16 AM|
I'm interested and would like to understand, (I'm not saying your wrong), but when you prime on a show quality vehicle, you only give it one coat of primer, let it cure, block it and then another coat and block it and so on until you get the body straight enough for a show quality finish?
|11-08-2012 10:02 AM|
|tech69||just one prime session. On average, it takes me two prime sessions to get show quality results. 2-3 prime sessions on hoods and decklids. We also don't push it by spraying excess material on the car so the one prime isn't very much but the reasoning for not piling it on is so the primer is always hard and cured throughout.|
|11-08-2012 09:59 AM|
|69 widetrack||Prime once generally means that if you do the body work properly the first time and prime it, you don't need to re-prime after you block it and find imperfections in the body work...Phrase generally used by flat rate body men and preppers as they don't get paid to prime it a second time.|
|11-08-2012 05:05 AM|
|novafreek6872||What exactly is a "prime once"? Thanks|
|11-07-2012 12:25 PM|
another update: We went next door to throw on the decklid of the Gran Sport and got to see it that much closer to being done. Turned out nice for a prime once. Not sure if it's cause the painter was in a good mood when priming it or perhaps the basic contours of this car made it easier, cause the 69 GTO is also a prime once but didn't turn out nearly as good.
|11-07-2012 12:15 PM|
new video up on 69 GTO / endura bumper repair
not an expert at repairing these but have learned a thing or two about them during this repair. Going forward, my next Endura bumper repair will be repaired that much more efficiently.